Jams
Turn the "T" shaped gear (blue) in the
5
direction of the arrow.
Make sure that the ink film is
wrapped around the blue core
at least once.
Correct
The ink film is not wrapped
Tight
around the blue core.
Blue core
6
Close the back cover securely by pushing
down on the dotted area at both ends (
Close the front cover securely (
Document jams –
If the unit does not release the document during feeding, remove the jammed document as
follows:
1
Open the front cover by pulling up the centre
part.
Remove the jammed document carefully.
2
3
Close the front cover securely.
Note:
Do not pull out the jammed paper forcibly before
opening the front cover.
80
Incorrect
Reverse
Slack
$
).
sending!
"T" shaped gear
(blue)
#
).
2
Front cover
Centre part
Front cover
Ink film
Dotted
area
1
Back cover
Jammed document