Table of Contents
Advertisement
Date and time, your logo and facsimile
telephone
You should program the date and time, your logo and facsimile telephone number. This
information will be printed on each page transmitted from your unit.
Example:
FROM : Panasonic Fax
Setting the date and time
Press p.
1
Display:
Press ( or ) until the following is
2
displayed.
Press w.
3
Example:
4
Enter the correct month/day/year by selecting
2 digits for each, using the dial keypad.
Example: August 10, 2002
Press 08 10 02.
Enter the correct hour/minute by selecting
5
2 digits for each, using the dial keypad.
Press * to select "AM" or "PM".
Example: 3:15 PM
1. Press 03 15.
2. Press * until "PM" is displayed.
number!
Your facsimile telephone number
Your logo
Fax Correspondence
SYSTEM SET UP
PRESS NAVI.[
SET DATE & TIME
PRESS SET
Cursor
M:01/D:01/Y:02
TIME: 12:00AM
M:08/D:10/Y:02
TIME: 12:00AM
M:08/D:10/Y:02
TIME: 03:15AM
M:08/D:10/Y:02
TIME: 03:15PM
FAX NO. : 1234567
Press w.
6
The next feature will be displayed.
I H
]
Press p.
7
MENU
Note:
You can enter the number by pressing + or
- in steps 4 and 5. In this case, press )
to move the cursor.
The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press ( or ) to move the cursor to the
incorrect number, and make the correction.
Setup
Date and time
Feb. 26 2002 09:02AM
P1
YOUR LOGO
PRESS SET
Display
SET
17
Advertisement
Table of Contents
