Date And Time, Your Logo And Facsimile Telephone Number - Panasonic KX-FP85 Operating Instructions Manual

Date and time, your logo and facsimile
telephone number!
You should program the date and time, your logo and facsimile telephone number. This
information will be printed on each page transmitted from your unit, fulfilling the requirements of
the Telephone Protection Act of 1991.
Example:
FROM : Panasonic Fax
Setting the date and time
Press MENU
1
Display:
2 Press , then
Press .
3 SET
4 Enter the correct month/day/year by selecting
2 digits for each, using the dial keypad.
Example: Aug. 10, 2000
Press 0 8 1
5 Press SET .
Enter the correct hour/minute by selecting
6
2 digits for each, using the dial keypad.
Press to select "AM" or "PM".
Example: 3:15PM
1. Press 0 3
2. Press until "PM" is displayed.
Your facsimile telephone number
Your logo
Fax Correspondence
.
1.SYSTEM SET UP
0 1
.
SET DATE & TIME
M:01/D:01/Y:00
Cursor
0 0 0 .
M:08/D:10/Y:00
TIME: 12:00AM
1 5 .
TIME: 03:15AM
TIME: 03:15PM
For fax advantage assistance, call 1-800-435-7329.
FAX NO. : 1234567
Press
7
8 Press
Note:
You can enter your number by rotating
JOG DIAL
press to move the cursor.
The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press or
incorrect number, and make the correction.
If you press
display will return to the previous one.
Setup
Date and time
Feb. 26 2000 09:02AM P1
SET .
SETUP ITEM [
MENU .
Display
MENU
JOG DIAL SET
STOP
in steps 4 and 6. In this case,
to move the cursor to the
while programming, the
STOP
]
/
13