Toshiba Q9 Plus ASD Quick Start Manual page 29

Figure 9. Terminal Board.
J100
1 to 2 = Sink (*)
2 to 3 = Source
J101
(24 V)
1 to 2 = Sys. Supplied (*)
2 to 3 = Ext. Supplied
SW301
V/I Switch (*I)
TB1
TB2
TB3
TB4
*
= Default Setting
See Figure 20 on pg. 23
See the section titled
See the section titled
terminal sizes and torque specifications when making Terminal Board connections.
Q9 Plus ASD Quick Start Guide
Sink Source TB1 TB2 TB3 TB4
CAUTION
SW200
Half/ Ful l Duplex(*) Swit ch
RS485 4-Wire Communication
for more information on the Terminal Board connections.
Terminal Descriptions on pg. 18
Cable/Terminal Specifications on pg. 93
Ensure that the ground screw is securely
in place to prevent arcing, intermittent
operation, or system failure.
S4
for terminal descriptions.
for information on the proper cable/
21