Table of Contents
Advertisement
Linear Acoustic AERO.mobile User Guide
4.4.12 ALT Mode
Selects mode of the Main In 7/8 between stereo and three mono modes. Selections are:
•
Stereo: Channel 7/8 are passed without modification
•
Mono: Channel 7 and 8 are summed and passed as dual mono
•
Mono Ch 7: Channel 7 input is used for dual mono
•
Mono Ch 8: Channel 8 input is used for dual mono
4.4.13 Downmix Ch Mode
Selects the mode of Primary Program sent to the Secondary signal processing path and
eventually outputs 5/6 and 7/8 (please see the block diagram in Chapter 1):
•
Stereo: Passes downmixed input signals directly through to 5/6 and 7/8
•
Mono: Sums outputs 1/2 and presents them as dual mono
•
Mono Lo: Sends Lo output of downmix as dual mono
•
Mono Ro: Sends Ro output of downmix as dual mono
NOTE: Downmix Ch Mode does not affect the Main Outputs 1/2 or 3/4
4.5
SDI Status Menu
Pressing the left arrow key when at the top menu will display the status of an applied SDI
signal. The SDI input is auto-sensing between SD and HD, and although it is not recom-
mended to hard switch input streams between SD and HD if a clean switch is desired, the
unit will automatically track the change. HD or SD, frame rate and frequency are displayed.
S D I V i d e o S D - S D I
5 2 5 i 2 9 . 9 7 H z 4 : 2 : 2
S D I V i d e o H D - S D I
Figure 4-6 SDI Status Screens
27
1 0 8 0 p
2 4 H z
Detailed Operation
Advertisement
Table of Contents
