Linear Acoustic AERO.mobile User Guide
4.2
Statistics Menu
Provides details about software, firmware and DSP versions, DSP communications status,
as well as listing any installed options. This menu also shows the presence for each of the
AES pairs, 1-8.
•
•
•
•
•
•
•
•
•
•
4.3
Setup Menu
Entering the Setup menu gives access to Presets/Processing adjustment, I/O settings,
Communication settings and System settings. With the exception of the Presets/Pro-
cessing menu and the Mobilizer Menu, which are described in detail in Chapter 5, all other
settings will be described below.
4.4
I/O Menu
The I/O menu is where the input and output audio, control, and metadata signals are se-
lected to interface with the loudness control and upmixing engines.
4.4.1
Master Bypass
Enabled de-energizes the SDI and metadata relays for a hard bypass. This will of course
create a momentary interruption in these signals but is useful for troubleshooting.
Firmware Version: 5100.03.05 (or later)
Device Options: None
App Uptime: Shows time running in d:hh:mm:ss
Ref Chg: Counts the number of times the system reference has changed since
reboot or reset
DSP 1 Version: V1.7.0
DSP 1 TX Errors: Shows transmission errors between micro and DSP1.
DSP 1 Rx Errors: Shows receive errors between micro and DSP
DSP 2 Version: V2.2.0
DSP 2 TX Errors: Shows transmission errors between micro and DSP1.
DSP 2 Rx Errors: Shows receive errors between micro and DSP.
23
Detailed Operation