Mb Type Set To Mb1&Mb2 (Stereo) - Linear Acoustic AERO.mobile User Manual

Linear Acoustic AERO.mobile User Guide
"Input Source"
HD/SD-SDI
SDI In
Demux
(HD/SD)
48kHz
PLL
48k
Int.
GPI In
MB1&MB2 mode provides two separate Mobilizer and AEROMAX engines for process-
ing two independent programs.
• Audio outputs will be available as follows:
•
•
•
•
Once the Input and Output settings are correct, the main menu will default to showing
input and output meters, and assuming audio is present in the applied SDI signal, there
should be activity on at least the first two meters.
The best way to learn the processor is to explore the different settings with audio applied
and monitored. There are several factory presets to support many different tastes. Some
presets may not sound much different at first, but will perform very differently depending
on program content. The constraints of mobile listening environments require processing
that is by its very nature different than traditional processing.
"Clock Source"
Input 1/2
24-bit
SRC
Input 5/6
24-bit
SRC
Input 7/8
24-bit
SRC
© 2010 Linear Acoustic Inc.
Figure 2-4 MB Type set to MB1&MB2 (Stereo)
AES 1/2 = Primary Program (Engine 1)
AES 3/4 = Copy of Primary Program (Engine 1)
AES 5/6 = Secondary Program (Engine 2)
AES 7/8 = Copy of Secondary Program (Engine 2)
"Presets"
"MB"
Main Mobilizer
Loudness/DRC
#1
Mobilizer
MB2
#2
Dwnmx
M/S
Mono/St
ALT
Loudness/DRC
M/S
Alt/DM
ALT
Mono/St
15
Connections and Quick Setup
"SDI Out Dest"
HD-SDI
Mux
Main
(AES 1/2)
Aeromax
2.0 (#1)
Copy
(AES 3/4)
Alt/Dwnmx
(AES 5/6)
Aeromax
2.0 (#2)
Copy
(AES 7/8)
SDI Out
(HD/SD)