Table of Contents
Advertisement
Linear Acoustic AERO.mobile User Guide
it will be processed and output from 7/8 with a duplicate on 5/6.
•
When MB Type = None or MB1 (single MB engine) and the Ch 7/8 Output Source
menu is set to Downmix, then the main program on 1/2 and 53/4 will also be output
from 5/6 and 7/8.
•
When MB Type = MB1&MB2 Stereo, the second MB engine gets its input from 5/6
and outputs to 5/6 with a duplicate on 7/8.
Flexibility sometimes comes at the price of complexity, so please refer to Chapter 4 and
the Block Diagram for more information. We know this can get confusing, so call us if you
get stuck, we will be happy to step you through it.
The best way to learn the processor is to explore the different settings with audio applied
and monitored. There are several factory presets to support many different tastes. Some
presets may not sound much different at first, but will perform very differently depending
on program content. Modern broadcast television offers the ability to process less, and
even the heaviest presets in the AERO.one are moderate by comparison to what might be
found in traditional analog television audio processors.
NOTE: For best audio quality, the AERO.one should be the only processor in line
with station audio. Please make sure to remove any legacy processing that
might have been installed for analog operation as it will impair the perfor-
mance capabilities of the AERO.one. We suggest checking drawings and
physical installations to make sure that this old gear is removed.
Connections and Quick Setup
12
Advertisement
Table of Contents
