Statistics Menu; Setup Menu; Aes Presence Detect For Applied Pairs (1-4 Are Used) - Linear Acoustic AERO.one V3 User Manual

Linear Acoustic AERO.one V3 User Guide
4.2

Statistics Menu

Provides details about software, firmware and DSP versions, DSP communications status,
as well as listing any installed options. This menu also shows the presence for each of the
AES pairs, 1-8.
•
•
•
•
•
•
•
•
•
•
•
Figure 4-6 AES presence detect for applied pairs (1-4 are used)
4.3

Setup Menu

Entering the Setup menu gives access to Presets/Processing adjustment, I/O settings,
Communication settings and System settings. With the exception of Presets/Processing
menu which is described in detail in Chapter 7, all other settings will be described below.
Firmware Version: 5100.04.05
Device Options: SDI
App Uptime: Shows time running in d:hh:mm:ss
Ref Chg: Counts the number of times the system reference has changed since
reboot or reset
DSP 1 Version: V1.5.0
DSP 1 TX Errors: Shows transmission errors between micro and DSP1.
DSP 1 Rx Errors: Shows receive errors between micro and DSP
DSP 2 Version: V2.6.0
DSP 2 TX Errors: Shows transmission errors between micro and DSP1.
DSP 2 Rx Errors: Shows receive errors between micro and DSP
AES In Detect: Shows presence of AES carrier on any of the 8 pairs (only
four pairs are currently used to support 8 audio channels). See below for a pic-
ture of the screen
23
Detailed Operation