Panasonic SA-AK110P Service Manual page 20

SA-AK110P /
8.6. Disassembly and reassembly for mechanism base drive unit
• Follow the (Step 1) - (Step 2) of Item 8.1.
• Follow the Disassembly for the CD Lid of Item 8.2.1.
• Follow the Disassembly for the CD changer unit of Item
8.2.2.
• Follow the (Step 1) - (Step 14) of Item 8.4
• Follow the (Step 1) - (Step 9) of Item 8.5
Step 1 Remove 3 screws.
Step 2 Release the claw, and then remove the gear holder.
Step 3 Remove the belt and change gear spring.
NOTE:
Take care not to lose the change gear spring.
Step 4 Remove the pulley gear, change gear and UP/DOWN
gear.
Step 5 Release the 2 claws, and then remove the bottom SW
P.C.B..
Step 6 Install the tray lock spring to hook temporary.
Step 7 Release the claw, and then remove the tray lock.
Step 8 Release the claw, and then remove the rear lock.
20