Panasonic SA-AK110P Service Manual page 14

SA-AK110P /
8.3.3. Replacement of the Power
Amplifier IC
• Checking the Power P.C.B.
• Follow the (Step 1) - (Step 2) of Item 8.1.
Step 1 Remove the 2 screws fixed to the Power Amplifier IC.
Step 2 Remove 2 screws fixed to the Power Amplifier IC and
Transistor Holders.
Step 3 Break the joint with a metal cutter as shown below.
8.4. Main Component Replacement Procedures
8.4.1. Replacement of the Traverse Deck
• Follow the (Step 1) - (Step 2) of Item 8.1.
• Follow the (Step 1) - (Step 6) of Disassembly for the CD Lid
of Item 8.2.1.
• Follow the disassembly instruction for the CD changer unit
of Item 8.2.2.
Step 1 Push the power button and the power turns OFF.
Step 4 Unsolder the terminals of Power Amp IC, transistor and
replace the component.
Step 5 Fix back the bottom chasis with a screw as shown.
Step 2 Remove the FFC boards.
Step 3 Remove the CD changer unit.
14