Panasonic SA-AK110P Service Manual page 13

Step 6 Remove 2 screws.
Step 7 Release the 2 claws, and then draw the front panel
ass'y.
• Check the Panel P.C.B., Deck P.C.B. and Transformer
P.C.B. as shown below
Step 8 Release the 6 screws, and then remove the rear cover.
• Checking the Power P.C.B. as shown below
• Follow the (Step 1) - (Step 2) of Item 8.1.
• Follow the (Step 1) - (Step 6) of Disassembly for the CD Lid
of Item 8.2.1.
• Follow the (Step 1) - (Step 8) of Checking for Panel
P.C.B.,Deck P.C.B., Transformer P.C.B. and Power P.C.B.
of Item 8.3.2.
NOTE:
Insulate Power P.C.B. with insulation material to avoid short
circuit.
13
SA-AK110P /