Miele CS 1112 Operating And Installation Instructions page 8

Warning and Safety instructions

Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.

The hob is not intended for use with an external timer switch or a
remote control system.

If the plug is removed from the connection cable or if the cable is
supplied without a plug, the appliance must be connected to the
electrical supply by a suitably qualified electrician.

If the connection cable is damaged, it must be replaced by a suit-
ably qualified electrician with a special connection cable of type H
05 VV-F (pvc insulated). See "Electrical connection".

The hob must be disconnected from the mains electricity supply
during installation, maintenance and repair work. Ensure that power
is not supplied to the appliance until after it has been installed or un-
til any maintenance or repair work has been carried out.

Danger of electric shock.
Do not use the hob if it is faulty, or if the ceramic surface is cracked,
chipped or damaged in any way. Switch it off immediately, discon-
nect it from the mains electricity supply and contact Miele.

If the hob is installed behind a furniture panel (e.g. a door), ensure
that the door is never closed whilst the hob is in use. Heat and mois-
ture can build up behind a closed furniture panel and cause sub-
sequent damage to the hob, the housing unit and the floor. Do not
close the door until the residual heat indicators have gone out.
8