Tube Compatibility Chart; Determination Of G-Values - VWR International Compact Star CS4 Instruction Manual

Tube Compatibility Chart:

Capacity may vary due to serum volume.

Determination of G-Values:

The centrifuging radius of the rotor is 8.5cm. See the tube compatibility chart for the
correct radius when using adapters and smaller tubes. The chart on the next page
can be used to determine g-values.
To use this chart, find the radius value on the radius scale. Place the edge of a ruler
on the value. Place the right side edge of the ruler on the speed scale at the desired
speed. The estimated RCF can then be read from the RCF scale where the ruler
edge passes through it. This chart can also be used to determine the proper speed
for the desired RCF value.