Operation During Recording - Panasonic Diga DMR-XW300 Operating Instructions Manual

Operation during Recording

Check the recording
programme
Display the recording
programme on the TV
screen
To stop recording
To pause recording
Switch the input
Switch to other channel
Perform 2 programmes
simultaneous recording
Press [STATUS ].
e.g., while 2 programmes simultaneous recording
It is necessary to display the recording programme onto the TV screen to perform operations such as
pause.
≥If the input was switched:
≥If the channel was switched: Press [W X CH].
≥If the drive was switched:
It is necessary to display the programme you want to stop on the TV screen while 2 programmes
simultaneous recording. (➡ above)
Press [∫].
≥From the start to the end of the recording is called one title.
It is necessary to display the programme you want to pause on the TV screen. (➡ above)
Press [;].
≥Press again to restart recording.
You can also press [¥ REC] to restart.
(Title is not split into separate titles.)
≥When the recording in DR mode is paused, that part will show up as still picture instantaneously while
playback.
Press [INPUT SELECT].
Press [W X CH].
Record other programme with steps 1–5 on page 23.
≥One of the 2 programmes needs to be digital broadcasting recorded with DR mode.
≥Channel switch / input switch while performing 2 programme simultaneous recording will switch between
the 2 recording programmes.
Recording programme
displayed on the TV screen
Recording programme not
displayed on the TV screen
Press [INPUT SELECT].
Press [DRIVE SELECT].
HDD
REC1
090 NINE HD
002 ABC TV REC2
"REC1" and "REC2" will light
REC1
REC2
RQT9135
33