Status Messages; Switch The Aspect Ratio Of The Screen - Panasonic Diga DMR-XW300 Operating Instructions Manual

Sound menu—Change the sound effect
Sound Effects
[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›]
[CD] [AVCHD]
≥Re-master1
≥Re-master2
(Discs record at 48 kHz or less)
This feature gives you a more natural sound by adding higher
frequency signals not recorded on the track.
≥V.Surround1
≥V.Surround2
(2-channel or over only)
Enjoy a surround-like effect if you are using two front speakers
only.
– Turn V.Surround off if it causes distortion. (Check the
surround function on the connected equipment.)
– V.Surround does not work for bilingual recordings.
≥This function is effective for audio from the HDMI terminal or
the DIGITAL AUDIO OUT terminal only when "Digital Audio
Output" is set to "PCM". (However, in this case, audio is
output as 2ch.)
Dialogue Enhancer
[HDD] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›]
[AVCHD]
(3-channel or over only, including a centre channel)
The volume of the centre channel is raised to make dialogue
easier to hear.

Status messages

Press [STATUS ].
The display changes each time you press the button.
Selected drive status/type of disc or USB
memory
HDD
The remaining time appears while stopped.
REC1
Recording or play status
PLAY
002 ABC TV Channel/The name of the station
Recording in background/copy progress
022 ABC REC2
indicator
Audio LR
Selected audio type
eng
Title number and elapsed time during play/
Recording mode
Date and time
18:53:50 11.11.2008

Remain HDD 45:53 DR
 T1
 T2
0:05.14 XP
1
 T2
2
Current position
≥When using Pause Live TV
Current time
18:53:50 11.11.2008
Live 18:53.50 View 18:40.12
The time when the picture currently displayed on the
television was broadcasted
1 TEN HD
Corontation street
9:00 - 11:00 Now
Rating:PG Bad Signal
Digital channel information (➡ 21)
Available recording time and
recording mode
Title number and
DVD 8:27 SP
elapsed time
0:10.10 DR
during recording/
0:00.10 DR
Recording mode
0:35.32
Total time
All DVB Services
10:30
Select FAV List
Software update
STTL TEXT

Switch the aspect ratio of the screen

When black bars are shown at the top, bottom, left, and right sides of
the screen, you can enlarge the image to fill the screen.
1
Press [OPTION].
2
Press [3, 4] to select "Aspect" and
press [OK].
3
Press [2, 1] to select the item.
≥Normal:
Normal output
≥Side cut:
The black bars on the right and left sides of the 16:9 image
disappear and the image is enlarged. Please note that the
right and left sides of the image are cut off when the black
bar is not displayed.
Display as frame on
the 4:3 aspect ratio
TV screen
16:9 image with
black bars on the
right and left
Displayed with black
bars on right and left
on the 16:9 aspect
ratio TV screen
§
Only when "TV Aspect" (➡ 84) is set to "Letterbox".
≥Zoom:
The black bars on the top and bottom sides of the 4:3 image
disappear and the image is enlarged. Please note that the
top and bottom sides of the image are cut off when the black
bar is not displayed.
4:3 image with
Displayed as frame
black bars at the
on the 16:9 aspect
top and bottom
ratio TV screen
4
Press [OK].
[Note]
≥The screen mode is switched to "Normal" in the following
situations:
– when you change channel
– when you start or end the playback of a title
– when the unit is turned off or on.
≥[DVD-V] "Side cut" does not have any effect.
≥When "TV Aspect" (➡ 84) is set to "Pan & Scan" or "Letterbox", the
"Zoom" effect is disabled.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
Enlarged display
with black bar
§ erased with Side
cut
Enlarged display
with black bar
erased with Side
cut
Enlarged display
with black bar
erased with
Zoom
RQT9135
75