Panasonic Diga DMR-XW300 Operating Instructions Manual page 19

4
Press [3, 4] to select "On" or "Off"
and press [OK].
Quick Start
On
Off
When "On" is selected, power consumption
during standby will increase, and "Power Save"
option will be set to "Off".
OK
RETURN
≥On:
It is possible to start quickly from the power off state.
≥Off:
It will go into the Power Save mode when the power is
turned off.
After Quick Start setting is complete, TV aspect setting screen
appears.
5
Press [3, 4] to select the TV aspect
and press [OK].
TV Aspect
16:9 WIDE TV
16:9
4:3 TV
Pan & Scan
Letterbox
OK
RETURN
≥16:9:
When connected to a 16:9 widescreen television
≥Pan & Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture
(➡ 110).
≥Letterbox:
When connected to a 4:3 aspect television.
16:9 picture is shown in the letterbox style
(➡ 110).
When television picture appears, set up is complete.
To stop partway
Press [RETURN].
∫ To confirm that stations have been tuned
correctly (➡ 81)
∫ To restart set up (➡ 80)
∫ Download from the TV
If this unit is connected to a Panasonic TV (VIERA) supporting
HDAVI Control 3 via an HDMI cable, then the setting information
on the TV is acquired by this unit when the unit is turned on for
the first time. Please proceed to the following steps.
Download from TV
Download in progress. Please wait.
RETURN : to cancel
RETURN
After Download from TV is complete, Quick Start setting
screen appears.
Press [3, 4] to select "On" or "Off" and press [OK].
Quick Start
On
Off
When "On" is selected, power consumption
during standby will increase, and "Power Save"
option will be set to "Off".
OK
RETURN
When television picture appears, set up is complete.
To stop partway
Press [RETURN].
[Note]
≥Acquisition of the setting information is not supported by all
Panasonic TVs (VIERA).
≥The acquisition may take some time depending on the VIERA
setting information.
≥If Region Selection screen is displayed, please go to step 3 on
page 18.
RQT9135
19