Operation During Recording - Panasonic Diga DMR-XS400 Operating Instructions Manual

To set the recording time
1 Select "Recording Time" or "Continuous recording" in
step on page 28.
Recording You can set the length of recording
Time time from 30 minutes to 4 hours.
Select the recording time.
≥You can also set the time with
[REC ¥].
Continuous The recording is continued until you
recording press [STOP ∫].
2 Press [OK].
Notes for recording of an encrypted broadcast (
To convert the recording mode after recording in DR
mode ( 46)
≥ One recording will terminate when simultaneous recording is being done
and timer recording starts.
≥ When "Automatic Standby after OTR" is set to "On" (
turned to standby mode if this unit is not operated for approximately
5 minutes after completing "Automatic Stop" or "Recording Time".
≥ The SD quality programme can not be converted to HD quality.
∫ Recording mode conversion
Conversion will be performed after the unit is turned off. It
will take about the same time as the recorded duration.
To confirm whether the conversion is completed
( 46)
To cancel a conversion (
standby" conversion)
≥ When a programme is recorded in encrypted form, conversion will
not start until decryption has finished. (
≥ The title before conversion (the title recorded in DR mode) will be
deleted once the conversion is completed.
≥ When the HDD does not have enough remaining space, conversion
will not start.
≥ This function is stopped when this unit is turned on. Conversion will
start from the beginning again once the unit is turned off.
≥ The conversion will not start if the timer recording is scheduled within
the time required for the conversion.
≥ When converted, audio track, multi channel audio, audio language
and subtitle will be converted with the same settings as at the start of
recording.
≥ Teletext will not be recorded.
31)
87), this unit is
46, To cancel a "During
31)

Operation during Recording

To check the recording programme
Press [STATUS ].
e.g., While recording 2 programmes simultaneously
HDD
Recording programme displayed on
REC1/OTR AUTO
the TV
Recording programme not displayed
REC2
on the TV
To switch the Channel
Press [CH W X].
To switch the Input
Press [INPUT SELECT].
To display the recording programme
on the TV
It is necessary to display the recording programme onto the
TV screen to perform operations such as pause.
Press [CH W X] or [INPUT SELECT] to select
the recording channel.
Simultaneous rec and play
You can play the recording title from the beginning or the
titles previously recorded to the HDD.
1
While recording
Press [DIRECT NAVIGATOR].
DIRECT NAVIGATOR Grouped Titles
HDD Time Remaining 45:54 (DR)
All
Not Viewed Movie Social/Economic
Channel Date Title Name
Start Time 9:00 Rec time
Prog.Type: Movie
PLAY
Delete
OPTION
RETURN
PHOTO / MUSIC Select
"[" is displayed on the recording programme.
2 Select the title, then press [OK].
VIDEO
Sport Video (AVCHD)
Titles
0:01(DR)
Page Page Up
Page Down
29
VQT3C77