To Show Teletext; Digital Channel Information - Panasonic Diga DMR-XW300 Operating Instructions Manual

To show Teletext

You can enjoy teletext broadcasting, including news, weather
forecasts and subtitles, if this service is provided by the
broadcasters.
When "TEXT" appears in digital channel information (➡ right)
1
Press [TEXT ].
Sub page number
<<01 02 03 04 05 06 07
Current
P100
page
number
TELETEXT
INFORMATION
Colour bar
2
Press [3, 4], the numbered buttons,
or the colour buttons to select the
page.
Follow the instruction on the screen to select the page.
To show the sub page
(Only when there are sub pages)
Press [2, 1].
∫ Change the Teletext mode
"Teletext" of the Setup menu can be changed to following modes.
(➡ 84)
≥TOP mode (Only when there is TOP text)
TOP is a particular improvement of the standard teletext service
that results in an easier search and effective guide.
– Fast overview of the teletext information available
– Easy to use step-by-step selection of the topical subject
– Page status information at the bottom of the screen
≥List mode
Four differently coloured page numbers are situated at the
bottom of the screen. Each of these numbers can be altered
and stored in this unit.
To store frequently viewed page (List mode only)
During the page is displayed
1 Press the colour button of the colour to store.
2 Press and hold [OK].
P100
Broadcast
101 200 400 888
The number changes to white.
To change stored pages (List mode only)
1 Press the colour button of the colour to change.
2 Enter the new page number with the numbered buttons.
3 Press and hold [OK].
To exit the teletext screen
Press [TEXT ]
[Note]
≥The teletext function depends on respective stations.
While stopped
Press [STATUS
1 TEN HD
Corontation street
9:00 - 11:00
Rating:PG
>>
1 Channel and Station Name
2 Programme name and Broadcast time
3 Current favourite list
4 Change the favourite list
5 Software update (➡ 90)
6 The parental ratings level is displayed
7 TV signal is weak (➡ below)
8 Subtitle (➡ 20)
9 Teletext (➡ left)
: Multiple audio
To switch information of the current programme and the next
programme
Press [2, 1].
To show detailed information about the programme
Press [STATUS
To hide the information screen
Press [STATUS
If "Bad Signal" is displayed:
≥Adjust the position and direction of the aerial.
≥Check that the current digital broadcast channel is correctly
broadcasting.
[Note]
You can also select the other channel when the information screen is
displayed by pressing [3, 4] and [OK].
∫ If New service message appears
(➡ 81, New Service Message)

Digital channel information

].
10:30
Select FAV List
Now Software update
Bad Signal STTL TEXT
] again.
] once or twice.
All DVB Services
RQT9135
21