Operation during Recording
Check the recording
programme
Switch the input
Switch to other channel
Display the recording
programme on the TV
screen
To stop recording
To pause recording
Perform 2 programmes
simultaneous recording
Press [STATUS
].
e.g., while 2 programmes simultaneous recording
Press [INPUT SELECT].
Press [
CH].
1 2
It is necessary to display the recording programme onto the TV screen to perform operations such as
pause.
If the input was switched:
Press [INPUT SELECT].
If the channel was switched: Press [ 1 2 CH].
If the drive was switched:
Press [DRIVE SELECT].
It is necessary to display the programme you want to stop on the TV screen. (➡ above)
Press [
].
g
From the start to the end of the recording is called one title.
It is necessary to display the programme you want to pause on the TV screen. (➡ above)
Press [
].
h
Press again to restart recording.
You can also press [ * REC] to restart.
(Title is not split into separate titles.)
If paused while recording in DR mode, the paused part may become a still picture for a moment during
playback of that programme.
Record other programme with steps 1–4 on page 22.
One of the 2 programmes needs to be digital broadcasting recorded with DR mode.
"Manual recording" is also available. (➡ 54)
Channel switch / input switch while performing 2 programmes simultaneous recording will switch
between the 2 recording programmes.
Recording programme
displayed on the TV screen
Recording programme not
displayed on the TV screen
unit's display;
"REC1" and "REC2" will light.
REC1
REC2
HDD
REC1
001 TV ONE
002 TV2 REC2
RQT9487
31