Main Unit; The Unit's Display - Panasonic Diga DMR-XW300 Operating Instructions Manual

Main unit

1Standby/on switch (Í/I) (➡ 18)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
2Disc tray (➡ 15)
3Connection for digital video (DV) camcorder (➡ 54)
4Display (➡ below)
5Recording indicator
6Remote control signal sensor
7Connection for VCR, camcorder etc. (➡ 53, 54)
8Open/close disc tray (➡ 15)

The unit's display

SDVD
1Copying indicator
2SD card slot indicator
3USB port indicator
4Disc indicator
5Timer recording indicator
6Drive (HDD, DVD or SD) indicator
7Main display section indicator
8Playback indicator
≥Indicators for functions that this unit does not support will not light.
SD USB
PLAY
Pull to flip down the front
panel.
9SD card slot (➡ 15)
:USB port (➡ 15)
;Channel select (➡ 23)
<Start recording (➡ 23)/Specify a time to stop recording (➡ 23)
=Stop (➡ 23, 38)
>Start play
Rear panel terminals (➡ 16, 17, 91–94)
RQT9135
13