Manual Programming - Panasonic DMR-ES20DEB Operating Instructions Manual

TIMER-controlled recordings
TIMER Remain 1:58 SP
RECORDING
12:09:37 18/11 THU
Disc
VPS STTL
Nr Name Datum Stop Mode
No. Name Date Start Start Stop Mode
PDC PDC space
01 BBC1 18/11 THU 0:00 0:30 SP ON !
02 ITV 18/11 THU 10:00 11:30 SP ON !
New Timer Programme
Press ENTER to store new programme.
ENTER
CANCEL
RETURN
TIMER Remain 1:58 SP
RECORDING
12:09:37 18/11 THU
Name
Date Start Stop Mode STTL
1 BBC1 18/11 THU 7:50 8:50 SP ON
BBC1 Programme Name
Press ENTER to input a programme name.
ENTER
CANCEL
RETURN
Reminder
A Timer Recording will start in
a few seconds. Press TIMER button
to record or RETURN button to cancel.
TIMER
Remain 1:58 SP
RECORDING
12:09:37 18/11 THU
STTL Disc
VPS
Nr Name Datum No. Name Date Start Stop Stop Mode Mode
Start
PDC PDC space
01 BBC1 MON-SAT 8:00 8:30 SP ON 10.2.
02 ITV 18/11 THU 15:00 15:30 SP ON OK
03 CH4 18/11 THU 10:30 11:30 SP ON !
New Timer Programme
[Chan. Name] CH4
[Prog. Name] The best movie selection: "Gone with the wind"
ENTER
CANCEL
RETURN
PROG/

Manual programming

CHECK
Press PROG/CHECK. The TIMER RECORDING screen appears.
Confirm the highlighted line with ENTER.
Use to select the name of the TV station.
Use to switch to the next field and change entry using
Name, Date, Start and Stop can also be entered using the numeric buttons.
If you want to enter the programme name, use
and confirm with ENTER.
Once you have made all changes, save the programme with ENTER.
To continue programming, select [New Timer Programme].
Press TIMER to switch the unit to TIMER standby mode.
The symbol lights up in the unit display.
To cancel or pause the recording, press
RAM If you record several programmes in a row, the first few seconds of the following
programme are not recorded on the disc,
-R -RW V +R approx. 30 seconds.
( )
Reminder
If you enter a TIMER programming and do not switch the recorder to TIMER standby
because you want to watch a television programme, then you will be reminded of the
pending start 1 minute before the recording starts.
Press TIMER if you want to start the timer recording.
Press RETURN if want to cancel the timer recording.
Even if you forget or don't want to press TIMER to switch to TIMER standby, the recorder will start recording.
You have to press RETURN for cancelling the timer recording.
PROG/
, changing or deleting TIMER RECORDINGS
CHECK Checking
Press PROG/CHECK.
Use to select the TIMER RECORDING.
Checking or changing
Check the settings or correct them if necessary using ENTER
and . Confirm your changes with ENTER.
Programmes that are currently being recorded cannot be changed.
Deleting
Delete a programme with CANCEL.
Programmes that are currently being recorded cannot be deleted.
If you selected PDC [ON], TIMER-controlled recordings are deleted from the list after two days.
Make sure that the unit is switched to TIMER standby mode.
The symbol lights up in the unit display.
Storage space on the disc
OK: There is enough storage space available on the disc for the recording.
If PDC is switched on during the recording, then the entire programme will probably
not be recorded.
(Date): For recordings that are made daily or weekly, the display indicates whether there is
enough storage space on the disc.
!: Is displayed if the disc is not in the unit, is write-protected or does not have enough
storage space.
.
to select [Programme Name]
TIMER again.
34
29