Setup With Q Link; Setup Without Q Link - Panasonic DMR-ES20DEB Operating Instructions Manual

Setup with Q Link

Auto-Setup
Ch
35 4
Digital Auto-Setup in progress, please wait.
Suche Sender, bitte warten.
RETURN: to abort
RETURN: abbrechen
Download from TV
RETURN
Pos
4
Download in progress, please wait.
RETURN: to abort
RETURN
Owner ID
PIN number
* * * *
Name
House No.
Postcode
RETURN
RETURN : leave
Clock
Automatic Off
Time Date
: : . .
0 00 00 1 1 2005
No
0 9
Clock cannot be set automatically.
CHANGE Please set the clock manually.
SELECT
ENTER: store RETURN: leave
ENTER
RETURN
Setup without Q Link (Automatic Tuning)
Auto-Setup
Ch
35 4
Digital Auto-Setup in progress, please wait.
Suche Sender, bitte warten.
RETURN: to abort
RETURN: abbrechen
Auto-Setup
RETURN
Ch
35 4
Analogue Auto-Setup in progress, please wait.
Suche Sender, bitte warten.
RETURN: to abort
RETURN: abbrechen
RETURN
Owner ID
PIN number
* * * *
Name
House No.
Postcode
RETURN
RETURN : leave
Clock
Automatic Off
Time Date
: : . .
0 00 00 1 1 2005
No
0 9
Clock cannot be set automatically.
CHANGE Please set the clock manually.
SELECT
ENTER: store RETURN: leave
ENTER
RETURN
Download from TV using
You can download the tuning positions for analogue channels from the TV set.
Time and date will be set automatically by Auto Clock Setting function.
Note that you must first perform a station search if you use the TV for the first time.
If you have a Panasonic television, [Download from TV] will be displayed automatically at
the beginning of the station transfer.
Switch your television on and select the AV channel.
Switch the device on using the Standby/on switch.
The unit starts the station transfer. A station search for the digital channel starts first.
The number of channels found is displayed on the screen after the station search.
Then the analogue station positions are automatically transferred from the television.
The station transfer is complete when the Owner ID screen appears.
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later, press the
RETURN button. Your DVD Recorder is now ready to use.
To set the Owner ID now, use
digit PIN number. Press , to correct the digit.
Make sure that you will remember the PIN number (make a note of it).
Press the ENTER button twice to confirm.
Enter the [Name], [House No] and [Postcode] in the same way, using
Press the ENTER button to confirm each entry.
Press the RETURN button to leave the Owner ID screen.
You will now see the TV picture. Your DVD Recorder is now ready to use.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
Press to set the correct time and date and press ENTER to finish this setting.
Note: A wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
If Auto-Setup has previously been completed the DVD Recorder will not start
Auto-Setup automatically. In this case you can re-start Auto-Setup again.
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again.
Auto-Setup
The automatic setup saves all available TV stations. If the station also broadcasts date and
time, then the clock is also set automatically.
Switch on your television and select the AV channel.
With the Standby/on switch turn on the DVD Recorder.
Automatic tuning for all available TV stations begins. The search is first performed for the
digital and then the analogue stations. The number of channels found is displayed on the
screen after the station search. Approximate duration is 5 minutes.
After Automatic tuning has finished, the Owner ID screen will appear.
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later, press the
RETURN button. Your DVD Recorder is now ready to use.
To set the Owner ID now, use
digit PIN number. Press , to correct the digit.
Make sure that you will remember the PIN number (make a note of it).
Press the ENTER button twice to confirm.
Enter the [Name], [House No] and [Postcode] in the same way, using
Press the ENTER button to confirm each entry.
Press the RETURN button to leave the Owner ID screen.
You will now see the TV picture. Your DVD Recorder is now ready to use.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
Press to set the correct time and date and press ENTER to finish this setting.
Note: A wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-
Setup automatically. In this case you can re-start Auto-Setup again. If you want to
cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again.
(Registered trademark of Panasonic)
and press the Numeric buttons or
and press the Numeric buttons or
to enter a four-
.
43
to enter a four-
.
43
11