Timer Recording; Manual Programming; Change Profile; Automatic Sp/Lp Switching During A Vhs Recording - Panasonic Diga DMR-EZ45VEBS Operating Instructions Manual

FUNCTIONS
FUNCTIONS
Timer Remain DVD 0:02 SP
Recording
VHS --:-- --
Name Date Start Stop
- -.- -.- - - -:- - - -:- -
All Services : -----
Please set Channel.
ENTER Change
Profile
RETURN
STTL Function: DVB channels only.
Timer
Remain DVD 0:02 SP
Recording
VHS --:-- --
Name Date Start Stop
1 BBC1 11/ 3 SAT 14:00 16:00
All Services : BBC1
Press ENTER to input a programme name.
ENTER
Delete
RETURN
Timer
Remain DVD 2:00 SP
Recording
VHS 4:02SP
The remaining time of a VHS cassette will
only be displayed after using a function like
playback, fast forward or such.
If you did not insert a cassette or disc,
the following message appears:

Timer Recording

This programme has been stored.
Insert a recordable cassette.
Cannot set timer standby mode.
ENTER RETURN
42
Recording

Manual programming

12:40:46 24/ 2 FRI
Make sure that there is a recordable disc or cassette in the selected drive. Otherwise,
the Timer Recording will not run.
Press FUNCTIONS.
Drive Mode STTL
Select [Recording] with
---
---
SP
The Timer Recording screen appears.
Confirm [New Timer Programme] with ENTER.
Programme Name
Switch to the next entry with
Name
Number
0 9
Date
Start/Stop : Start time/end of recording. If you press and hold the
12:40:46 24/ 2 FRI
Drive
Mode
STTL
Drive Mode STTL
DVD SP ON
To enter the title of the recording, select [Programme Name] with
with ENTER.
Programme Name
Enter the desired name in the Programme Name menu.
Press STOP
After you have made your changes, save the programming with ENTER.
To enter other programmes, select [New Timer Programme].
12:40:46 24/ 2 FRI
The unit automatically switches to timer standby mode at the start time.
REC flashes in the unit's display one minute before the recording is set to start.
A Timer Recording does not start while a disc is being formatted, deleted or
The recording begins afterwards
RAM If you programmed the Timer programmes one after the other in sequential
order, the first few seconds of the second Timer Recording are not recorded.
With other types of discs, it is approx. 30 seconds.
If you receive your TV programme via a satellite receiver (digital/analogue):
On the external unit, select the station with the programme that you want to record.
The station must not be changed during the recording.
It is always the programme on this set station which is recorded.
Name

Change Profile

To change the station name manually, you can select the station from the preset
categories and profiles.
Press the BLUE button in the Name box to see the first station of the
corresponding category or preset profile.
Select the required station with

Automatic SP/LP switching during a VHS recording

AUTO: If there is insufficient recoding time left on a video cassette, the SP/LP
function switches the video recording speed to LP (NTSC to EP). This ensures that
the programme is recorded in full. Should the remaining recording time on the video
cassette still not be sufficient even in LP mode, then the programme will not be
recorded in full. Automatic switching to EP mode is not possible.
and confirm with ENTER.
and change the setting with
: Select the programme position/name of the TV station with
: One-time, daily or weekly programming.
the time increases/decreases in 30-minute intervals. You can also use
the number buttons for these entries.
: Select the drive.
: Recording mode DVD: XP, LP, EP, SP, FR
: Recording mode VHS: SP, LP, EP, AUTO
: Subtitles [On] or [Off]. Recorded subtitles cannot be deleted later.
to apply the name.
.
: Select AV2 as the name of the TV station with
and press ENTER to confirm.
DVD
VHS
.
.
buttons,
and confirm
34 99
finalize d.
.