Timer Recording; Code; Manual Programming - Panasonic DIGA DMR-ES30V Operating Instructions Manual

Recording
Numeric
buttons
DIRECT NAVIGATOR
3, 4, 2, 1
ENTER
PROG/CHECK
REC MODE
[RAM] [-R] [-RW‹V›] [+R]

Timer Recording

You can enter up to 16 programmes a month in advance.
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
≥Check that the clock is set to the correct time. If it has not been set,
set it (l 46).
≥Release protection (disc l 28, cartridge l 28) [RAM].
≥Insert a disc (l 8) and confirm there is sufficient empty space for
recording on it (l 47).
≥[-R] [-RW‹V›] [+R] When recording bilingual broadcasts, only the
audio selected in "Bilingual Audio Selection" (l 42) is recorded
("M 1" or "M 2").
≥Press [DVD].
∫ Using G-

CODE

®
Entering the G- numbers is an easy way of timer recording.
CODE
You can find these numbers in TV listings in newspapers and
magazines.
[1]
Press [G-Code].
[2]
Press the numeric buttons to enter the G-
number.
≥Press [2] to move back to correct a digit.
[3]
Press [ENTER].
≥Confirm the programme and correct it if necessary using [3,
4, 2, 1] ("Manual programming" l right, step 3).
≥Mode (Recording mode)
XP,.SP,.LP,.EP,.FR (l 23)
^------------------------------------J
26
VQT0P03
DVD/ VHS
TV
VOLUME
CH
INPUT SELECT
AV
OPERATION DVD
VHS DVD DVD
SELECT
TRACKING/V-LOCK
AUDIO
CANCEL CANCEL/RESET
G-Code G-Code
G-Code
SLOW/
SKIP/ INDEX REW SEARCH FF
PLAY
FUNCTIONS
TOP MENU
SUB MENU RETURN
S
TIME SLIP
PROG/CHECK PROG/CHECK
DISPLAY STATUS JET REW
REC REC MODE REC MODE DVD ERASE TIMER TIMER
CREATE
F Rec
DUBBING CHAPTER
VHS DVD
A B C
system
G-Code Remain
TIMER Remain
RECORDING
Name Date Start Stop
1 01 20.7. TUE 10:00 11:00
***
P ENTER t t
You can also press [REC MODE] to change the recording
mode.
≥To enter the name of the programme
Press [2, 1] to select "Programme Name" and press [ENTER]
(l 30).
≥If "-- -----" appears under "Name", press [3, 4] to select a
desired programme position.
After you have entered the information of a TV station, it is kept
in the unit's memory.
≥"Invalid Entry" is displayed when you enter the wrong G-
number. Re-enter the G-
[4]
If the programme is correct
Press [ENTER].
≥Make sure that the timer recording has been programmed
correctly on the TIMER RECORDING screen (l 27).
≥Repeat steps 1–4 to programme other recordings.
[5]
Press [ , TIMER].
≥"
" lights on the DVD unit's display.
The timer recording standby mode is activated on DVD.
However, the unit may not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record on VHS even if
the timer recording standby mode is activated on DVD.
≥Timer recording can be started whether the unit is turned on or off.
[6]
Turn the unit off when you do not play on DVD
(DVD-RAM) or, play or record on VHS.
≥If the timer recording is started with keeping the unit turned on,
the unit is not turned off automatically even after the timer
recording is completed. You can turn the unit off during timer
recording.
∫ To release the unit from recording standby
Press [ , TIMER].
" " goes out.
≥Be sure to press [
put the unit on recording standby. Timer recording will work only if
" " is displayed.
∫ To cancel recording when recording has already
begun
Press [ , TIMER].
≥You can also press and hold [∫] on the DVD main unit for more
than 3 seconds to stop recording.
Note
Refer to Note in Manual programming (l 27).

∫ Manual programming

[1]
Press [PROG/CHECK].
≥Make sure "New Timer Programme" is selected.
2:00 SP
12:53:00 13. 7. TUE
CODE
[2]
Press [ENTER].
[3] Press [2, 1] to move
and change the items
with [3, 4].
≥You may use the numeric
2:00 SP
12:53:00 13. 7. TUE
buttons to enter "Name", "Date", "Start", and "Stop".
Mode
≥Name (Programme Position/TV Station Name)
SP
≥Date
Programme Name
You can also make a daily or weekly programme.
Each daily or weekly programme is counted as one
programme.
≥Start (start time)/Stop (finish time)
The time increases or decreases in 30-minute increments if
you hold down the button.
number.
CODE
, TIMER] before the programme start time to
TIMER
RECORDING
"New Timer
No. Name Date
01 01 20.7. TUE
***
Programme" is
New Timer Programme
selected.
TIMER
RECORDING
Name Date
. .
P ENTER t
DVD
CODE
Remain 2:00 SP
12:53:00 13. 7. TUE
Disc
Start Stop Mode
space
10:00 11:00
SP OK
Remain
2:00 SP
12:53:00 13. 7. TUE
Start Stop Mode
: : SP
Programme Name
t