Panasonic DMR-ES20DEB Operating Instructions Manual page 7

Remote control
7m
30°
30°
Remote control
signal sensor
SETUP
Remote Control
DVD 1
Clock
Owner ID
Tuning
Quick Start
On
Disc
System Update
Picture
Shipping Condition
Sound
Default Settings
Display
Remote Control
Connection
SELECT
Automatisch
TAB
Others
DVD 1
RETURN Aus
SELECT
TAB
DVD 2
Deutsch
RETURN
DVD 3
SELECT
RETURN
ENTER
RETURN
Point the remote control at the unit's sensor. Avoid obstacles in the path of the
transmission. The maximum range of the remote control is 7 m directly in front of the unit.
Keep the transmission window and the unit sensor clean. The procedure can be impaired
by direct sunlight or doors of glass cabinets.
Child lock
You can lock the buttons of the unit and the remote control.
Press and hold RETURN and ENTER until
The unit is now locked.
In order to unlock the child lock, repeat the procedure until
Operating a television set
Change the remote control code to operate your television set.
Press and hold the TV on and off switch button.
Enter the two-digit code for your television set.
The input must be repeated after batteries are changed.
Trademark Code Trademark
Panasonic 01-04,45 GOLDSTAR/LG
AIWA 35 GOODMANS 05,06,31
AKAI 27,30 GRUNDIG
BLAUPUNKT 09 HITACHI 22,23,31,40-42
BRANDT 10,15 INNO HIT
BUSH 05,06 IRRADIO
CURTIS 31 ITT
DESMET 05,31,33 JVC
DUAL 05,06 LOEWE
ELEMIS 31 METZ
FERGUSON 10 MITSUBISHI 06,19,20
Some television models of the brands listed above, (e.g. older Panasonic units), cannot
be operated using the remote control.
Switching to AV input on your Panasonic television set
Press AV. Each press of the button switches between TV reception and AV input.
If you use another Panasonic device at the same location, change the mode of the
remote control so that you can operate the units independently of each other.
Setting the remote control
Setting the remote control mode for unit.
Press FUNCTIONS in stop mode.
Use to select [To Others] and confirm with ENTER.
Use to select SETUP and confirm with ENTER.
Use to select [Others],
Use to select the desired mode [DVD 1, 2 or 3] and confirm with ENTER.
Accept the desired mode on the remote control.
Press and hold the ENTER button for approx. 2 seconds and, at the same time,
enter the number that corresponds to the selected mode (1, 2 or 3).
Press RETURN to exit the menu.
If the mode of the remote control does not correspond with that of the unit,
[REMOTE DVD 1 / 2 / 3] will appear on the unit display.
Press and hold the ENTER button for approx. 2 seconds and, at the same time,
enter the number that corresponds to the selected mode (1, 2 or 3).
If you want to operate two units independently of each other with the same remote
control, then change the mode of the remote control.
The input must be repeated after batteries are changed.
X HOLD
appears in the display.
X HOLD
Code Trademark Code
31 MIVAR
NEC
09 NOKIA 25-27
NORDMENDE
34 ORION
30 PHILIPS 05,06
25 PHONOLA 31,33
17,39 PIONEER
07 PYE 05,06
28,31 RADIOLA 05,06
SABA
to select [Remote Control] and confirm with ENTER.
disappears.
Trademark Code
24 SALORA 26
36 SAMSUNG 31,32,43
SANSUI 05,31,33
10 SANYO 21
SBR 06
37
SCHNEIDER 05,06,29-31
SELECO 06,25
SHARP 18
38 SIEMENS 09
SINUDYNE 05,06,33
SONY 08
TELEFUNKEN 10-14
10
THOMSON 10,15,44
7