Setup With Q-Link; Setup Without Q-Link - Panasonic DMR-ES30VEB Quick Start Manual

Setup with Q-Link

Download from TV
Pos
4
Download in progress, please wait.
RETURN: to abort
RETURN
Owner ID
PIN number
* * * *
Name
* * * * * * * * * * * * * *
House No.
* * * * * * * * * * *
Postcode
* * * * * * * * * * *
RETURN
RETURN : leave
Clock
Automatic
Time Date
: : . .
0 00 00 1 1 2005
No
0 9
Clock cannot be set automatically.
Please set the clock manually.
CHANGE
SELECT
ENTER: store RETURN: leave
ENTER
RETURN

Setup without Q-Link

(Automatic Tuning)
Auto-Setup
Ch
35 4
Auto-Setup in progress, please wait.
Suche Sender, bitte warten.
RETURN: to abort
RETURN: abbrechen
RETURN
Owner ID
PIN number
* * * *
Name
* * * * * * * * * * * * * *
House No.
* * * * * * * * * * *
Postcode
* * * * * * * * * * *
RETURN
RETURN : leave
Clock
Automatic
Time Date
: : . .
0 00 00 1 1 2005
No
0 9
Clock cannot be set automatically.
Please set the clock manually.
CHANGE
SELECT
ENTER: store RETURN: leave
ENTER
RETURN
Download from TV using
You can download the tuning positions from the TV set. This unit Auto Clock
Setting function synchronizes the time when the TV channel that is broadcasting
time and date information is tuned.
Note that you must first perform a station search. If you have a Panasonic
television, [Download from TV] will be displayed automatically at the beginning of
the station transfer.
Switch your television on and select the AV channel.
Switch the device on using the Stand-by/on switch.
The unit starts the station transfer. The station transfer is complete when the menu
Owner ID appears.
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it
later, press the RETURN button. Your DVD Recorder is now ready to use.
To set the Owner ID now, use
enter a four-digit PIN number. Press , to correct the digit.
Make sure that you will remember the PIN number (make a note of it).
Press the ENTER button twice to confirm.
Enter the [Name], [House No] and [Postcode] in the same way, using
Press the ENTER button to confirm each entry.
Press the RETURN button to leave the Owner ID screen.
You will now see the TV picture. Your DVD Recorder is now ready to use.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
Off
Press
setting.
Mind that a wrong date or time will influence the programmed recording of TV
programmes (don't forget to change summer time and winter time).
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-
Setup automatically. In this case you can re-start Auto-Setup again. See page 72 of
Operating Instructions.
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again. See page 72 of Operating Instructions.
Auto-Setup
The automatic setup saves all available TV stations. If the station also
broadcasts date and time, then the clock is also set automatically.
Switch on your television and select the AV channel.
With the Stand-by/on switch turn on the DVD Recorder.
Automatic tuning for all available TV stations begins.
Approximate duration is 5 minutes.
After Automatic tuning has finished, press RETURN.
The Owner ID screen will appear.
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it
later, press the RETURN button. Your DVD Recorder is now ready to use.
To set the Owner ID now, use
enter a four-digit PIN number. Press , to correct the digit.
Make sure that you will remember the PIN number (make a note of it).
Press the ENTER button twice to confirm.
Enter the [Name], [House No] and [Postcode] in the same way, using
Press the ENTER button to confirm each entry.
Press the RETURN button to leave the Owner ID screen.
You will now see the TV picture. Your DVD Recorder is now ready to use.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
Off
Press
setting.
Mind that a wrong date or time will influence the programmed recording of TV
programmes (don't forget to change summer time and winter time).
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-
Setup automatically. In this case you can re-start Auto-Setup again. See page 72 of
Operating Instructions.
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again. See page 72 of Operating Instructions.
(Registered trademark of Panasonic)
and press the Numeric buttons or
to set the correct time and date and press ENTER to finish this
and press the Numeric buttons or
to set the correct time and date and press ENTER to finish this
- 4 -
to
.
to
.