Setup With Q-Link; Setup Without Q-Link - Panasonic Diga DMR-ES20DEB Quick Start Manual

Setup with Q-Link

Auto-Setup
Ch
35 4
Digital Auto-Setup in progress, please wait.
Suche Sender, bitte warten.
RETURN: to abort
RETURN: abbrechen
Download from TV
RETURN
Pos
4
Download in progress, please wait.
RETURN: to abort
RETURN
Owner ID
PIN number
* * * *
Name
House No.
Postcode
RETURN
RETURN : leave
Clock
Automatic Off
Time Date
: : . . 2005
0 00 00 1 1
No
0 9
Clock cannot be set automatically.
Please set the clock manually.
CHANGE
SELECT
ENTER: store RETURN: leave
ENTER
RETURN

Setup without Q-Link

(Automatic tuning)
Auto-Setup
Ch
35 4
Digital Auto-Setup in progress, please wait.
Suche Sender, bitte warten.
RETURN: to abort
RETURN: abbrechen
Auto-Setup
RETURN
Ch
35 4
Analogue Auto-Setup in progress, please wait.
Suche Sender, bitte warten.
RETURN: to abort
RETURN: abbrechen
RETURN
Owner ID
PIN number
* * * *
Name
House No.
Postcode
RETURN
RETURN : leave
Clock
Automatic Off
Time Date
: : . .
0 00 00 1 1 2005
No
0 9
Clock cannot be set automatically.
Please set the clock manually.
CHANGE
SELECT
ENTER: store RETURN: leave
ENTER
RETURN
Download from TV using
You can download the tuning positions for analogue channels from the TV set.
Time and date will be set automatically by the Auto Clock Setting function.
Note that you must first perform a station search if you use the TV for the first time.
If you have a Panasonic television, [Download from TV] will be displayed
automatically at the beginning of the station transfer.
Switch your television on and select the AV channel.
Switch the device on using the Standby/on switch.
The unit starts the station transfer. A station search for the digital channel starts first. The
number of channels found is displayed on the screen after the station search. Then the
analogue station positions are automatically transferred from the television. The station
transfer is complete when the Owner ID screen appears.
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later,
press the RETURN button. Your DVD Recorder is now ready to use.
To set the Owner ID now, press the Numeric buttons or
PIN number. Press , to correct the digit.
Be sure to remember the PIN number (write it down).
Press the ENTER button twice to confirm.
Enter the [Name], [House No] and [Postcode] in the same way.
Press the ENTER button to confirm each entry.
Press the RETURN button to leave the Owner ID screen.
You will now see the TV picture. Your DVD Recorder is now ready to use.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
Press to set the correct time and date and press ENTER to finish this
setting.
Mind that a wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-Setup
automatically. In this case you can re-start Auto-Setup again. See page 71 of Operating
Instructions.
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again. See page 71 of Operating Instructions.
Auto-Setup
The automatic setup saves all available TV stations. If the station also broadcasts
The date and time, then the clock is also set automatically.
Switch on your television and select the AV channel.
With the Standby/on switch turn on the DVD Recorder.
Automatic tuning for all available TV stations begins.
the digital and then the analogue stations. The number of channels found is displayed on
the screen after the station search.
Approximate duration is 5 minutes.
After Automatic tuning has finished, press RETURN.
The Owner ID screen will appear.
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later,
press the RETURN button. Your DVD Recorder is now ready to use.
To set the Owner ID now, press the Numeric buttons or
PIN number. Press , to correct the digit.
Be sure to remember the PIN number (write it down).
Press the ENTER button twice to confirm.
Enter the [Name], [House No] and [Postcode] in the same way.
Press the ENTER button to confirm each entry.
Press the RETURN button to leave the Owner ID screen.
You will now see the TV picture. Your DVD Recorder is now ready to use.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
Press to set the correct time and date and press ENTER to finish this
setting.
Mind that a wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-Setup
automatically. In this case you can re-start Auto-Setup again. See page 71 of Operating
Instructions. If you want to cancel Auto-Setup before it has finished, press the RETURN
button. You can restart Auto-Setup again. See page 71 of Operating Instructions.
- 4 -
(Registered trademark of Panasonic)
The search is first performed for
to enter a four-digit
to enter a four-digit