TH-50PZ77U
6.23. Remove the speaker L, R
1. Disconnect the relay connector .
2. Remove the screws (×4
holder.
3. Remove the speaker L, R.
6.24. Remove the Plasma panel
section from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw (×1
each).
2. Remove the cabinet assy and the plasma panel fastening
screws (×13
).
3. For leaving the plasma panel from the cabinet assy, pull the
bottom of the front frame forward, lift, and remove.
each) and remove the speaker
6.25. Remove the K-Board and the
S-Board
1. Remove the cabinet assy. (See section 6.24.)
2. Remove the screws (×13
bottom.
3. Unlock the cable clampers to free the cable.
4. Remove the screws (×2
metal.
5. Remove the screws (×2
6. Disconnect the connector (S1) and Remove the S-Board.
16
) and remove the glass holder
) and remove the front P.C.B.
).