Removing A Power Supply - Siemens RUGGEDCOM RX1511 Installation Manual

RUGGEDCOM RX1511
Installation Guide
Figure 5: Installing a Power Supply
1. Chassis 2. Power Supply
3. Hand-tighten the screws to secure the power supply.
Section 2.2.1.2

Removing a Power Supply

To remove a power supply, do the following:
1. Remove the screws that secure the power supply.
2. Pull the power supply from the chassis.
Figure 6: Removing a Power Supply
1. Chassis 2. Power Supply
Removing a Power Supply
3. Screws
3. Screws
Chapter 2
Installing the Device
1
2
3
1
2
3
9