Formatted Capacity; Lba Mode - Seagate ST2000LX001 Product Manual

Table 1 Drive Specifications Summary (continued)
Drive Specification
Operational Shock
Non-Operational Shock
Vibration, operating
Vibration, non-operating
Nonrecoverable read errors
Rated workload
Warranty
Load-unload cycles
Supports Hotplug operation per the
Serial ATA Revision 3.2 specification
1. One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and
formatting.
2.1

Formatted Capacity

Model
ST2000LX001
ST1000LX015
ST500LX025
1. One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating
environment and formatting.
2.1.1

LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of guaranteed
sectors as defined above.
Refer to Configuring and Mounting the Drive
of drives with capacities over 137 GB.
Seagate FireCuda Product Manual, Rev. C
ST2000LX001
Average annualized workload rating: <55 TB/year.
The AFR specification for the product assumes the I/O workload does not exceed the average
annualized workload rate limit of 55 TB/year. Workloads exceeding the annualized rate may
degrade the product AFR and impact reliability as experienced by the particular application.
The average annualized workload rate limit is in units of TB per calendar year.
To determine the warranty for a specific drive, use a web browser to access the following web
page: http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the "Is my Drive under Warranty" link. The following are required to be
provided: the drive serial number, model number (or part number) and country of purchase.
The system will display the warranty information for the drive.
(1)
Guaranteed Sectors
Formatted Capacity
2000 GB 3,907,029,168
1000 GB 1,953,525,168
500 GB 976,773,168
on page 18 (words 60-61 and 100-103) for additional information about 48-bit addressing support
ST1000LX015
400 Gs at 2 ms max
1000 Gs at 1 ms max
5–200 Hz: 2.0 Gs
201–500 Hz: 1.0 Gs
5–500 Hz: 5.0 Gs
14
1 per 10 bits read
600,000 at 25°C, 50% rel. humidity
Yes
Bytes per Sector
512 (logical) / 4096 (physical)
Drive Specifications
ST500LX025
7