Drive Specifications - Seagate ST2000LX001 Product Manual

2.0

Drive Specifications

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the
drive and this drive are used throughout this manual to indicate the following drive models:
The specification summaries listed in the following tables are for quick reference. For details on specification measurement or definition, refer to the
appropriate section of this manual.
Table 1 Drive Specifications Summary
Drive Specification
(1)
Formatted capacity
Guaranteed sectors
Heads
Disks
NAND flash Commercial Multilevel Cell (cMLC)
Bytes per sector
Recording density
Track density
Areal density
Spindle speed
Data transfer rate (up to)
Interface
ATA data-transfer modes supported
Cache buffer
Height (mm/in)
Width (mm/in)
Length (mm/in)
Weight (g/lb) max
Average latency
Startup current, Max (+5V)
Voltage tolerance (including noise)
Operating temperature
Non-operating temperature (ambient)
Temperature gradient
Relative humidity
Relative humidity gradient (max)
Wet bulb temperature
Altitude, operating
Altitude, non-operating
(below mean sea level, max)
Seagate FireCuda Product Manual, Rev. C
ST2000LX001
2TB
3,907,029,168
4
2
512 (logical) / 4096 (physical)
Multiword DMA modes 0–2
Ultra DMA modes 0–6
7.0 (± 0.2) / 0.276 (± 008)
69.85 (± 0.25) / 2.750 (± 0.010)
100.35 (+0.20/-0.25) / 3.951 (+0.008/-0.010)
96 / 0.212
20°C per hour max (operating)
35°C per hour max (non-operating)
5% to 95% (operating)
5% to 95% (non-operating)
37.7°C max (operating)
40.0°C max (non-operating)
–304.8 m to 3048 m (–1000 ft to 10,000+ ft)
–304.8 m to 12,192 m (–1000 ft to 40,000+ ft)
ST1000LX015
1TB
1,953,525,168
2
1
8GB
2296 KFC/in
580 KTP/in avg
2
1327 Mb/in avg
5400 RPM
140 MB/s
SATA 6Gb/s
PIO modes 0–4
128 MB
92 / 0.203
5.6 ms
1.0 A
5V ± 5%
0° to 60°C
–40° to 70°C
30% per hour
ST500LX025
500GB
976,773,168
6