Electromagnetic Immunity; 2.10.1 Dc Magnetic Field Immunity; Reliability - Seagate ST2000LX001 Product Manual

2.10

Electromagnetic Immunity

When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the
radio frequency (RF) environment as defined in
Table 7 Radio Frequency Environments
Test
Electrostatic discharge
Radiated RF immunity
Electrical fast transient
Surge immunity
Conducted RF immunity
Power Frequency H-field immunity
Voltage dips, interrupts

2.10.1 DC Magnetic Field Immunity

Table 8: DC Magnetic Field Immunity
DC Magnetic Field Immunity
1
Field in Gauss at the drive envelope. Testing per procedures 20800109-349 and 20800109-350.
2
Passing Field in Gauss at the drive envelope. In practice, testing is conducted using a fixed distance from the bottom of the magnet to the top
of the drive. Calibration of the field vs. distance is done with a Hall probe with no magnetic materials present.
3
Testing to be done with magnet .375" dia. x 0.100" Ni-plated NdFeB; B,~11.5 kG, magnetized along its length; the magnet is oriented with the
length perpendicular to the drive cover/PCBA. Drive to be properly secured during test.
2.11

Reliability

Nonrecoverable read errors
Load/Unload (U/UL)
25°C, 50% relative humidity
Rated workload
Warranty
Seagate FireCuda Product Manual, Rev. C
Table 7.
Description
Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV
80 to 1GHz, 3 V/m, 80% AM with 1 kHz sine
900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz
± 1 kV on AC mains, ± 0.5 kV on external I/O
± 1 kV differential, ± 2 kV common, AC mains
150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine
1 A/m, 50Hz/60Hz, 3 axes
30% Reduction for 25 cycles
>95% Reduction for 250 cycles
>95%, 0.5 cycles
Test
1, 2, 3
14
1 per 10 bits read, max
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
Average annualized workload rating: <55 TB/year.
The AFR specification for the product assumes the I/O workload does not exceed the average
annualized workload rate limit of 55 TB/year. Workloads exceeding the annualized rate may
degrade the product AFR and impact reliability as experienced by the particular application. The
average annualized workload rate limit is in units of TB per calendar year.
To determine the warranty for a specific drive, use a web browser to access the following web
page: http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the "Is my Drive under Warranty" link. The following are required to be pro-
vided: the drive serial number, model number (or part number) and country of purchase. The sys-
tem will display the warranty information for the drive.
Performance Reference
Level Standard
B EN 61000-4-2: 95
EN 61000-4-3: 96
A
ENV 50204: 95
B EN 61000-4-4: 95
B EN 61000-4-5: 95
A EN 61000-4-6: 97
A EN 61000-4-8: 97
C
C EN 61000-4-11: 94
B
Product Spec (Standalone)
400 Gauss, RMS
Drive Specifications
15