Lighting System - Yamaha WR250F 2008 Owner's And Service Manual

LIGHTING SYSTEM

INSPECTION STEPS
Refer to the following flow chart when inspecting the lighting system for possible problems.
Check the bulb and bulb socket.
OK ↓
Check the taillight (LEDs).
OK ↓
Check the AC magneto. (Lighting coil)
OK ↓
Check the entire lighting system proper for con-
nections.
OK ↓
Check the rectifier/regulator. (Out-put voltage)
• Remove the following parts before inspection.
1. Seat
2. Fuel tank
3. Left side cover
• Use the following special tools in this inspection.
Pocket tester:
YU-3112-C/90890-03112
No good →
Replace the bulb and/or bulb socket.
No good →
Replace the taillight assembly.
No good →
Replace.
Improperly
Repair or replace.
connected →
No good →
Replace.
7-18
LIGHTING SYSTEM