Handlebar - Yamaha WR250F 2008 Owner's And Service Manual

HANDLEBAR

REMOVING THE HANDLEBAR
Order
Headlight
1 Hot starter cable
2 Hot starter lever holder
3 Clutch cable
4 Clutch lever holder
5 Engine stop switch
6 Brake master cylinder
7 Start switch
8 Throttle cable cap
9 Throttle cable #1 (pulled)
10 Throttle cable #2 (pushed)
11 Right grip
12 Tube guide
13 Left grip
14 Handlebar upper holder
15 Handlebar
16 Handlebar lower holder
Part name
6-23
Q'ty
1 Disconnect at the lever side.
1
1 Disconnect at the lever side.
1 Disconnect the clutch switch lead.
1 Disconnect the engine stop switch lead.
1 Refer to removal section.
1 Disconnect the start switch lead.
1
1 Disconnect at the throttle side.
1 Disconnect at the throttle side.
1 Refer to removal section.
1
1 Refer to removal section.
2
1
2
HANDLEBAR
Remarks