Removing And Installing Panels - Jeep Renegade 2016 Owner's Manual

From the fully open position, pull the Open/Close
switch: the front panel will close completely.
Venting The Front Panel
To vent the front panel push and release the vent switch.
During the vent operation any push on the Open/Close
switch will stop the closing of the panel.
NOTE: If the My Sky is in open position, the vent switch
must be held until the panel vents.
Anti-Pinch Feature
The front panel of the retractable roof is equipped with a
anti-pinch safety system that is able to detect the pres-
ence of an obstacle during the opening and closing
motion of the panel.
GETTING TO KNOW YOUR VEHICLE 135
When this event occurs, the front panel stops and re-
verses immediately.
NOTE: With both panels removed the retractable roof
cannot be opened or closed.

Removing And Installing Panels

NOTE:
• Remove the panels only when the vehicle is stationary.
• The rear panel can be removed only when the front
panel is completely closed or removed.
4