The 4WD LOW mode helps to improve the off-road
performance in all modes. To enable 4WD Low, please
follow the steps below:
Enabling 4WD LOW
With the vehicle stationary, the ignition in the MAR/
RUN or with the engine running, shift the transmission
into NEUTRAL and push the button once 4WD LOW.
The EVIC/DID will display the message 4WD LOW
once the shift is complete.
NOTE:
• Both LOCK and LOW LEDs will blink and then
become active on the Selec-Terrain switch until the
shift is complete.
• The EVIC display will illuminate the 4WD Low icon.
Disabling 4WD LOW
To disable the 4WD LOW mode, the vehicle must be
stationary and the transmission shifted into NEUTRAL.
Push the 4WD LOW button once.
SELEC-TERRAIN
Selec-Terrain combines the capabilities of the vehicle
control systems, along with driver input, to provide the
best performance for all terrains.
Mode Selection Guide
Rotate the Selec-Terrain knob to select the desired mode.
STARTING AND OPERATING 355
7