• For more information, refer to "Electronic Vehicle
Information Center (EVIC)/ Driver Information Dis-
play (DID)" in "Getting To Know Your Instrument
Cluster" or "Uconnect Settings" in "Multimedia."
Replacing The Battery In The Key Fob With
Remote Control
The recommended replacement battery is one CR2032
battery.
NOTE:
• Perchlorate Material — special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
• Do not touch the battery terminals that are on the back
housing or the printed circuit board.
Key Fob With Remote Control
1. Separating RKE halves requires screw removal (if
equipped) and gently prying the two halves of the
GETTING TO KNOW YOUR VEHICLE 35
RKE transmitter apart using a screwdriver or similar
tool. Make sure not to damage the seal during re-
moval.
Integrated Vehicle Key Battery Removal
1 — RKE Transmitter
4