Disconnecting From A Phone; Using The Watch In A Medical Facility Or Aircraft; Unpairing; If You Purchase Another Phone - Casio Edifice EQB-700 Operation Manual

Important!
If you have problems establishing a
●
connection, it could mean that
CASIO WATCH+ is not running on
the phone. On the phone's home
screen, tap the "CASIO WATCH+"
icon. After the app starts up, hold
down the watch's (B) button for
about 1.5 seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with:
use CASIO WATCH+ to select
"Watch settings" n "Connection
time", and then specify a setting of 3
minutes, 5 minutes, or 10 minutes.

Disconnecting from a Phone

Pressing (B) terminates the Bluetooth
connection and returns the day of the week
hand to its normal operation.
Connected After disconnection
Operation Guide 5467
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
adjustment may cause problems, you can
perform the procedure below to disable it.
Perform the same procedure again to re-
enable auto time adjustment.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down the (B) button for about 1.5
seconds.
The day of the week hand will move to
●
"R". Keep (B) depressed until the day of
the week hand starts moving again and
then stops at "R".
The day of the week hand will move to
●
e when a connection is established
between the watch and phone.
3.
Y Tap in the following sequence: f n
"Watch settings".
4.
Y Tap "Time adjustment".
5.
Perform the operation shown on the
phone screen.

Unpairing

1.
X If the watch is connected with a phone,
press (B) to terminate the connection.
Connected
2.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
3.
Y Tap the CASIO WATCH+ j icon.
4.
Y In the "Previously registered watch" list,
tap the watch you want to unpair.
5.
Y Tap "Delete pairing registration".
6.
Y Tap "Delete".
This unpairs the watch from the phone.
Note
A X Pull out the crown to the second
click.
B X Hold down (C) for about five
seconds.
This causes the day of the week hand
to perform one revolution and deletes
the pairing information.
C X Push the crown back in.

If you purchase another phone

You need to perform the operation below
whenever you want to establish a Bluetooth
connection with a phone that is different from
the one you are currently connected with.
1.
Unpair the watch from your current (old)
phone.
2.
Pair the watch with your new phone.
After disconnection
If you are unable to re-pair the watch
●
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
Crown
Unpairing
l
Pairing the Watch with a phone
l
8