Troubleshooting - Casio Edifice EQB-700 Operation Manual

Troubleshooting

I can't pair the watch with a
phone.
Q1
I've never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
http://world.casio.com/os_mobile/wat/
Is CASIO WATCH+ installed on your
phone?
The CASIO WATCH+ needs to be
installed in order to connect with the
watch.
A Installing required app on your
l
phone
Are your phone's Bluetooth settings
configured correctly?
Configure the phone's Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
"Settings"n"Bluetooth"n On
●
"Settings" n "Privacy" n "Bluetooth
●
Sharing" n "CASIO WATCH+" n On
Android Users
Enable Bluetooth.
●
Other than the above.
Some phones need to have BT Smart
disabled to use CASIO WATCH+. For
details about setting procedures, see your
phone documentation.
On the Home Screen, tap: "Menu" n
"Settings" n "Bluetooth" n "Menu" n "BT
Smart settings" n "Disable".
Operation Guide 5467
Q2
I can't establish a connection
(pairing) between the watch and a
newly purchased phone.
To connect with a newly purchased phone,
you will need to perform the pairing operation
again with the new phone. Use CASIO
WATCH+ to delete the pairing information
from your current (old) phone, and then pair
the watch with the new phone.
If you purchase another phone
l
I can't reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is CASIO WATCH+ running on your
phone?
Check if CASIO WATCH+ is running on
the phone. On the phone's Home Screen,
tap the CASIO WATCH+ icon. Then on
the watch, hold down the CONNECT
button (B) for about 1.5 seconds.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the CASIO WATCH+ icon. Next,
on the watch, hold down the CONNECT
button (B) for about 1.5 seconds.
Q2
The phone is in the Airplane Mode.
Connection with the watch is not possible while
the phone is in the Airplane Mode. After exiting
the phone's Airplane Mode, go to its Home
Screen and tap the "CASIO WATCH+" icon.
Then on the watch, hold down the CONNECT
button (B) for about 1.5 seconds.
Q3
I changed the phone's Bluetooth
from enabled to disabled, and now I
can't connect anymore.
On the phone, disable and then re-enable
Bluetooth, and then go to the Home Screen
and tap the "CASIO WATCH+" icon. Next, on
the watch, hold down the CONNECT button
(B) for about 1.5 seconds.
Q4
I can't connect after turning off the
phone.
Turn on the phone and tap the CASIO WATCH+
icon. Then on the watch, hold down the
CONNECT button (B) for about 1.5 seconds.
13