Connection; Connecting With A Phone; Disconnecting From Your Phone; Unpairing - Casio 3501 Operation Manual

Table of Contents

Advertisement

Viewing a Recorded Location on a Map
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to view recorded location
information.
Note
You can use CASIO WATCHES to
delete recorded location information.

Connection

Connecting with a Phone

Your watch can connect with a phone that is
paired with it.
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l
C
Connecting with a Phone
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] start to flash.
When a connection is established
between the watch and phone,
[CNCT] will stop flashing and remain on
the display.
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
Watch Operation Guide 3501
Important!
If you have problems establishing a
connection, it could mean that CASIO
WATCHES is not running on your
phone. On your phone's home screen,
tap the "CASIO WATCHES" icon. After
the app starts up, hold down the
watch's (C) button for at least three
seconds.
Note
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
CASIO WATCHES: "Watch settings"
"Connection time with the app".
n
Next, select a setting of 3 minutes, 5
minutes, or 10 minutes.

Disconnecting from Your Phone

Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
and
e
Connected
and
e

Unpairing

Unpairing the watch from a phone requires
both CASIO WATCHES and watch
operations.
Connected
Deleting Pairing Information from
CASIO WATCHES
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to unpair.
Deleting Pairing Information from the
Watch
1. X
Hold down (C) for at least one second
to enter the Timekeeping Mode.
2. X
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3. X
Press (C) twice.
This causes the seconds to flash.
4. X
Hold down (B) for at least three
seconds. This will cause the [PAIR] and
[CLR] indicators to alternate on the
display. Release the button when only
[CLR] is displayed.
This deletes the pairing information from
the watch and returns to the timekeeping
Disconnected
display.
5. X
Press (A) to return to the Timekeeping
Mode.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
Deleting Pairing Information from the
l
Watch
Pair the watch with a phone.
l
C
Home City
Seconds
14

Advertisement

Table of Contents
loading

Table of Contents