5. 4K Photo and Drive Settings
Recording with the Post Focus function
1
Set the drive mode dial to [
2
Decide on the composition, and press the shutter
button halfway.
•
Auto Focus will detect focus areas on the screen.
(Excluding the edges of the screen)
•
If no areas on the screen can be brought into focus, the
focus display ( A ) will flash. Recording is not possible in
this case.
3
Press the shutter button fully to start recording.
•
The focus point changes automatically while recording.
When the icon ( B ) disappears, recording automatically
ends.
From the time you press the shutter button halfway until the end of recording:
•
Maintain the same distance to the subject and the same composition.
•
Do not operate the zoom.
•
A motion picture in MP4 format will be recorded. (Audio will not be recorded.)
•
When [Auto Review] is enabled, a screen that lets you select the desired focus area will
be displayed.
(P132)
About camera temperature
•
If the surrounding temperature is high, recording is performed continuously with the Post
Focus function, or the temperature of the camera rises, [
recording may stop halfway through to protect the camera. Wait until the camera cools
down.
].
130
4:3
4K
B
] may be displayed and
A
5
04
m
s
残
5
04
m
s