5. 4K Photo and Drive Settings
•
This function is not for use in a security camera.
•
[Time Lapse Shot] is paused in the following cases.
–
When the charge on the battery runs out
–
Turning the camera off
During [Time Lapse Shot], you can replace the battery and the card, and then restart by turning
on this unit. (Note that pictures taken after the restart will be saved as a separate set of group
pictures) Turn off this unit when replacing the battery or the card.
•
When [Shooting Interval] is set to a longer value, if the camera turns off automatically while
waiting for the next recording, we recommend that you use Time Lapse Shot in Auto Focus
Mode.
Not available in these cases:
•
This function is not available in the following cases:
–
[Handheld Night Shot]/[Panorama Shot] (Scene Guide Mode)
–
When using [Multi Exp.]
Creating Stop Motion Pictures
Applicable modes:
A stop motion picture is created by splicing pictures together.
1
Set the drive mode dial to [
2
Display the setup screen.
•
Switch to [Stop Motion Animation] if it is not selected.
(P136)
[Auto Shooting]
[Shooting Interval]
3
Press the shutter button halfway.
•
The recording screen will be displayed. You can also
perform the same operation by pressing and holding
[
] until the recording screen is displayed.
([Stop Motion Animation])
].
(P136)
[ON]
Takes pictures automatically at a set recording interval.
[OFF]
This is for taking pictures manually, frame by frame.
(Only when [Auto Shooting] is set to [ON])
Press 2/1 to select the recording interval (seconds),
press 3/4 to set it, and press [MENU/SET].
138
4:3
AFS
AFS
L