Panasonic DMC-G85KBODY Operating Instructions Manual page 162

6. Stabiliser, Zoom and Flash
2
Select the menu.
>
MENU
[Wireless]
[Wireless Channel]
[Wireless Setup]
3
Press 3/4 to select an item and then press [MENU/SET].
•
Press [DISP.] to fire a test-flash.
A Firing Mode
B Flash output
C Luminosity ratio
[Firing Mode]
[TTL]:
[AUTO]
[MANUAL]
[Built-in
[OFF]:
Flash] ¢1 /
[Flash Adjust.]
[External
Set the flash output of the camera manually when [Firing Mode] is set to [TTL].
¢1
Flash]
[Manual Flash Adjust.]
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
•
You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
[Firing Mode]
[TTL]:
[AUTO]
[MANUAL]:
[OFF]:
[A Group]/
[Flash Adjust.]
[B Group]/
Adjust the output of the wireless flashes manually when [Firing Mode] is set to
[C Group]
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the wireless flashes when [Firing Mode] is set to
[MANUAL].
•
You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
¢1 Not available when [Wireless FP] is set to [ON].
¢2 This option is not displayed when the flash (DMW-FL200L: optional) is attached to the
camera.
¢3 You can select these options only when the external flash is attached to the camera.
(P51)
[Rec] > [Flash]
Select [ON].
Select the channel you have set for the wireless flashes in
1
step .
Proceed to step
The camera automatically sets the output.
¢2,3 : Flash output is set by the external flash.
¢3 : Set the luminosity ratio of the external flash manually.
The flash on the camera side emits only communication light.
The camera automatically sets the output.
¢1 : The wireless flashes automatically set the output.
Set the luminosity ratio of the wireless flashes manually.
The wireless flashes of the specified group will not fire.
3
.
A
162
B
C