Recording With Post Focus - Panasonic DMC-GX80K Basic Operating Instructions Manual

Recording

Recording with Post Focus

Applicable modes:
The camera can perform Burst recording in the same picture quality as 4K photo
recording while automatically shifting the focus to different areas. After the recording, you
can select the desired area on the screen and save a picture in which the selected area is
in focus. This function is suited for recording still objects.
•
Use a UHS Speed Class 3 card. (P10)
•
When using [Post Focus], the angle of view is narrower.
1
Press [
2
2/1
Press
•
It can also be set by going to the [Rec] menu and selecting [ON] for [Post Focus].
3
Decide on the composition, and press
the shutter button halfway.
•
Auto Focus will detect focus areas on the
screen. (Excluding the edges of the screen)
•
If no areas on the screen can be brought into
focus, the focus display ( A ) will flash.
Recording is not possible in this case.
4
Press the shutter button fully to start
recording.
•
The focus point changes automatically while
recording. When the icon ( B ) disappears,
recording automatically ends.
From the time you press the shutter button
halfway until the end of recording:
•
Maintain the same distance to the subject and
the same composition.
•
Do not operate the zoom. (Otherwise,
recording will not be performed or will stop.)
•
A motion picture in MP4 format will be recorded. (Audio will not be recorded.)
•
When [Auto Review] is enabled, a screen that lets you select the desired focus
area will be displayed. (P37)
∫ Canceling [Post Focus]
Select [OFF] in step
•
If the surrounding temperature is high, or [Post Focus] recording is performed
continuously, or the temperature of the camera rises, [
recording may be stopped halfway through to protect the camera. Wait until the camera
cools down.
36
SQT1322 (ENG)
].
to select [ON] and press [MENU/SET].
2
.
[Post Focus]: [ON]
4:3
4K
B
] may be displayed and
A
5 04
m s
残
5 04
m s