Defective Engine Replace The Engine Pwb (See - Kyocera FS-C5300DN Service Manual

2HL/2HM/2HN
Code
4002 Polygon motor MC error
The polygon motor MC ready input is not
given for 10 s during the polygon motor
MC is ON.
4201 Laser output error (Black)
XXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX
4202 Laser output error (Cyan)
XXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX
4203 Laser output error (Magenta)
XXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX
1-4-10
Contents
Causes Check procedures/corrective measures
Defective harness Reinsert the connector. Also check for conti-
between polygon nuity within the connector harness. If none,
motor MC and remedy or replace the harness.
engine PWB
(YC30), or
improper connec-
tor insertion.
Defective laser Replace the laser scanner unit MC (See
scanner unit MC. page 1-5-36).
Defective engine Replace the engine PWB (See page 1-5-
PWB. 29).
Defective harness Reinsert the connector. Also check for conti-
between APC nuity within the connector harness. If none,
PWB K and engine remedy or replace the harness.
PWB (YC29), or
improper connec-
tor insertion.
Defective APC Replace the laser scanner unit YK (See
PWB K. page 1-5-36).
Defective PD PWB Replace the laser scanner unit YK (See
K. page 1-5-36).
Defective engine Replace the engine PWB (See page 1-5-
PWB. 29).
Defective harness Reinsert the connector. Also check for conti-
between APC nuity within the connector harness. If none,
PWB C and engine remedy or replace the harness.
PWB (YC30), or
improper connec-
tor insertion.
Defective APC Replace the laser scanner unit MC (See
PWB C. page 1-5-36).
Defective PD PWB Replace the laser scanner unit MC (See
C. page 1-5-36).
Defective engine Replace the engine PWB (See page 1-5-
PWB. 29).
Defective harness Reinsert the connector. Also check for conti-
between APC nuity within the connector harness. If none,
PWB Y and engine remedy or replace the harness.
PWB (YC30), or
improper connec-
tor insertion.
Defective APC Replace the laser scanner unit MC (See
PWB M. page 1-5-36).
Defective PD PWB Replace the laser scanner unit MC (See
M. page 1-5-36).
Defective engine Replace the engine PWB (See page 1-5-
PWB. 29).
Remarks