S In-Polarizer (R)/(G)/(B) Assembly - Sony VPL-EX100 Service Manual

1-3-14. S In-polarizer (R)/(G)/(B) Assembly

. Remove the upper case assembly. (Refer to Section 1-3-1.)
. Remove the rear panel. (Refer to Section 1-3-2.)
. Remove the main board. (Refer to Section 1-3-3.)
. Remove the G board. (Refer to Section 1-3-4.)
. Remove the lamp duct. (Refer to steps 1 and 2 in Section 1-3-5.)
. Remove the speaker. (Refer to Section 1-3-6.)
. Remove the optical block. (Refer to Section 1-3-7.)
5 Screw
(B2 x 5)
6 S in-polarizer (B) assembly
Front side
1-18 (E)
3 Screw
(B2 x 5)
4 S in-polarizer (G) assembly
A
1 Screw
(B2 x 5)
2 S in-polarizer (R) assembly
VPL-EX100