1-3-4. G Board
. Remove the upper case assembly. (Refer to Section 1-3-1.)
. Remove the rear panel. (Refer to Section 1-3-2.)
. Remove the main board. (Refer to Section 1-3-3.)
5 Four screws
(BVTP3 x 10)
6 Main board bracket
7 Power insulating sheet
8 Harness
9 G board
0 Two harnesses
*The illustration indicates VPL-EX120.
1-6 (E)
3 Screw
(PSW M3 x 8)
4 Ground terminal
1 Screw
(PS4 x 6)
2 Ground terminal
VPL-EX100