Solectek skyway User Manual page 7

Please note that the POE/PS units are different for client units and base station and you must
take care to plug in the right CAT5 cables into the POE/PS unit's RF-45 ports.
P
ORT TO THE RADIO UNIT IS INDICATED BY
•
P
ORT TO THE PREMISE SWITCH OR COMPUTER IS INDICATED BY
•
C. I L
NITIAL OGON
Open networking properties in your Windows OS. Enter the TCP/IP setup window of your
•
wired Ethernet adapter properties page. Set the IP addresses to the following values.
Open a Web Browser on the Test PC
•
At the URL line, type in the following:
•
C
ONNECTION
C
ONNECTION
Ethernet's IP Address:
Subnet Mask:
http://192.168.1.100 to access a client unit, or
http://192.168.1.200 to access a base station unit.
D C
IAGRAM FOR LIENT
D B
IAGRAM FOR ASE
"PWR LAN-OUT"
OR
"LAN-IN"
192.168.1.1
255.255.255.0
U
NITS
S
TATION
"DATA + PWR OUT"
"DATA-IN"
OR
7