Appendix B: Telnet Commands - Solectek skyway User Manual

Command R/W Default
acl RW enabled
arp RW
audioalign RW 1800 secs
bridge R
bw RW 20
chanplan R Varies by
Model, Region
cfgdiff R
clear W
clearevtlog W
clientcfg R/W
clientstat R

Appendix B: Telnet Commands

Usage
acl add [mac] [client-name]
acl del [mac]
acl show
acl [enable | disable]
arp [OPTION]
Options:
-a Display (all) hosts
-s Set new ARP entry
-d Delete a specified entry
-v Verbose
-n Don't resolve names
-i IF Network interface
-D Read [hwaddr] from given
device
-A, -p AF Protocol family
set audioalign [duration_secs]
show audioalign
show bridge
set bw [20 | 40]
show bw
show chanplan
cfgdiff [boot]
clear
clearevtlog
clientcfg <mac> [--name <name>] [--
dlmod <dlmod>] [--dlstr <dlstr>] [--ulmod
<ulmod>] [--ulstr <ulstr>]
clientstat <mac>
Description
Base Station only
Add/Delete/Show entries in the RF
access control list.
Enable or Disable acl function
Manipulate the system ARP cache
Set/show Audio Antenna Alignment
duration in seconds. Duration 0
disables alignment tone.
Show Bridge Table
Set RF bandwidth in MHz
Show channel plan.
Shows differences between current
configuration and default
Clears all Ethernet & RF Port
counters
Clear event log
Show status of and make changes
to configured clients
Show status of connected clients
46